English
English
Español
Français

User Access


Imperfelx Ads - Bitec 250x265 (1).jpg
APOC - CCS Sidebar - ProProgram - June
Estimating Edge - Sidebar Ad - Podcast Younger Gen
MCA - Sidebar Ad - MCA Summer Meeting 2025
ABC Supply - Sidebar Ad - Deliver Success in Any Project
Owens Corning - Sidebar - Roofle + OC - June
Sales Assist - Sidebar Ad - Build Present Close
English
English
Español
Français

Steeple

« Back To Roofers Talk
Author
Posts
November 23, 2008 at 3:22 a.m.

manbearpig

Just seeing if I can figure out how to post picture.>>>

January 27, 2009 at 4:48 p.m.

robert

Osb board why worry that stuff is garbage,shingles will probably pull the nails right out of that.>>>

January 27, 2009 at 2:15 p.m.

Dr.ROOF

I would figure it out this way. I get $25 a Sq and I can install 20 sq. a day no problem. Therefore it would be safe to say that I average $500 a day on an easy job. I would want 2 times my daily average to take on a job like that. The piece price goes out the window on specialty jobs. I figure if you really giver, you might be able to average 3 sq a day.>>>

November 24, 2008 at 2:01 a.m.

RABOIN

I got some prices on steeples one time. The kind you are looking at is a combination of them. You can get the top piece and then add a base and an extension etc. They can get pretty complicated, but they are all fibreglass. I like the crane idea mysel>>>

November 23, 2008 at 11:47 p.m.

builderr

I have an idea...... install a couple of heavy duty hinges to one side of thye base, then attach ropes to a bolt plated one end of the ridge and up to the top somewhere, and a come along and a cable from the opposite end, also secured to a bolt plated to>>>

November 23, 2008 at 8:32 p.m.

Slick

Hi,

If it is fiberglass, you could repair the holes. Any body shop could do the repair.

I would flash to it. Unless it was not sturdy and needed to be tightened up.>>>

November 23, 2008 at 3:26 p.m.

manbearpig

Man guys..again, you saved the day! Lefty...I had thought about drilling and slinging down with a crane, but I was hoping to salvage this unit for re-sale to another church, didnt know if I could repair drill holes.

But..I didnt even think of tree servic>>>


« Back To Roofers Talk
You must be logged in to reply to this topic.

General Coatings - Banner - Where will SF take you?
English
English
Español
Français

User Access


Imperfelx Ads - Bitec 250x265 (1).jpg
Renoworks - Sidebar Ad - Try now!
Estimating Edge - Sidebar Ad - Podcast Younger Gen
Quarrix - Sidebar - ProTect - Dec
CCS-OpenForBusiness-Sidebar
Sales Assist - Sidebar Ad - Build Present Close
Everest - Sidebar - Ascend