English
English
Español
Français

User Access


Glo Group - LDR Accelerator - Sidebar
Roof Hugger Sidebar Ad - Q2
METALCON - Sidebar ad - Ticket Giveaway 2025
APOC - CCS Sidebar - ProProgram - June
Brava - Sidebar - Jan
DaVinci - Sidebar Ad - May 2024 Unmatched, Unlimited, Uncompromising
METALCON - Sidebar Ad - METALCON 2025
English
English
Español
Français

Standing Seam Prices

« Back To Roofers Talk
Author
Posts
September 18, 2008 at 3:45 p.m.

Chipper

We've been slammed with a bunch of single ply work and got a call on a standing seam job. The project is about 28 deck squares, 12/12 pitch, straight gabled roof but has an intersecting gable/dormer on one side, Interlocking 16" oc panel. It's a dire>>>

September 20, 2008 at 1:25 a.m.

Lipper

Berridge Mfg cee lock panels. We roll form them on site. The coils are about $88 per square plus clips and screws. We fabricate all trim using sheet metal from the coils as well.>>>

September 19, 2008 at 4:24 a.m.

A-T-T

That seems kind of low Roofer J. What kind of Standing seam are you installing? We get near that for exposed fastened panels. Heck, my material costs are almost $300 a square.>>>

September 19, 2008 at 3:05 a.m.

Lipper

I'm from South Texas and down here we charge around $525 - $675 per Sq over solid decks.>>>

September 19, 2008 at 1:59 a.m.

A-T-T

I would be around $850 a sqr. for a walkable roof. A 12:12 I would probably come in around $1200 a Sqr.>>>


« Back To Roofers Talk
You must be logged in to reply to this topic.

METALCON - Banner Ad - METALCON 2025
English
English
Español
Français

User Access


Glo Group - LDR Accelerator - Sidebar
Owens Corning - Sidebar - Roofle + OC - June
Pli-Dek - Waterproofing L&L - Sidebar
Johns Manville - Sidebar Ad - L&L  EPDM Solutions
Leap - Sidebar - Free Trial
METALCON - Sidebar Ad - METALCON 2025
BITEC-StormBreaker-Sidebar