Translate
Default
English
Español
Français
User Access
some of what I do
« Back To Roofers Talk
Viewing 8
replies - 1 through 8
(of 8 total)
Author
Posts
September 22, 2008 at 11:25 p.m.
jfreynik
I do more then roofs>>>
September 23, 2008 at 10:26 p.m.
jfreynik
It's .027. The zinc is hard to work with and not kink or ding. Even harder to solder. It's easy to burn through if you hold the solder iron in one spot to long. You have to use pure tin solder for best results>>>
September 23, 2008 at 11:52 a.m.
builderr
I would have guessed it was from the tv show CSI Miami or Crossing Jordan>>>
September 23, 2008 at 10:21 a.m.
A-T-T
Nice. What gage material is that?>>>
September 23, 2008 at 10:08 a.m.
jfreynik
Yes it is . This was a old dry sink that I covered with zink and installed a drain. They plain to use it as a bathroom vanity.>>>
September 23, 2008 at 5:32 a.m.
Mike H
Is that a sink?>>>
September 23, 2008 at 12:01 a.m.
jfreynik
took some thought to make this out of one piece and get all the bends and hems correct. 
>>>
September 22, 2008 at 11:36 p.m.
jfreynik
try again 
>>>
September 22, 2008 at 11:33 p.m.
jfreynik
I GIVE UP None of the pics I try to load ever show up:angry:>>>
Viewing 8
replies - 1 through 8
(of 8 total)
You must be logged in to reply to this topic.
Translate
Default
English
Español
Français
User Access
