.050 seamless gutter

Gentlemen

I am looking for a sub who can roll approximately 100 LF of .050 seamless gutter>>>

Jed: If I remember correctly, aluminum expansion factor is 17 x 10 to the minus 6 power, which should be constant for all thickness. However, the heavier gages are stiffer and not likely to crinkle as much.>>>

So a Patty hmmmmmmmmmmmmmmmmm!! ;) ;) B) " i dunno " just funnin.>>>

my breaks are all 18 gauge and up as far as i know im to busy watching cops!>>>

So it was you huh patty :lol:>>>

I just looked it up. .050" is 16 gage? On second thought, I may not be able to roll it. Might have to have box gutter broke in 10 Ft. Sections. I know I can roll .042 and up to 24 gage steel. I've never bought 16 gage steel or .050 aluminum. >>>

I've got a 7 in Machine. I can roll just about anything as long as it 7" K-Style. :laugh:>>>

I have 6 inch maching you can borrow it! :laugh:>>>

JH Windber is only about an hour from here. Try calling North Coast - Ask for Regis King - his cell # is 412-551-6500 - the office number is 412-919-1300. I left him a message and told him that you may be calling. They may be able to help. Not sure about the 100' seamless, that would be a bear to install without wrinkles but who knows.>>>

Windber PA Just outside Johnstown.>>>

I know of a couple of places around the Pittsburgh area but where are you?>>>