English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
CRRC - Annual Meeting Registration 2024 = Sidebar Ad
SRS TopShield - Sidebar Ad - CraftGrade Independence
Westlake ad corrected size
McCormack Succession and Exit Planning - Sidebar Register
Owens Corning - Sidebar Ad - Buesiness Accelerator Roundtables
Kool Seal - Sidebar - Sales Rep - May 24
RoofersCoffeeShop - Where The Industry Meets!
English
English
Español
Français

Are You Missing the Sales Opportunity Created by the 2012 NFA Ventilation Codes?

RS_Slider_Cert_450x277_x1
May 3, 2017 at 5:42 a.m.

In order to comply with post-2012 NFA ventilation codes, contractors have the opportunity secure additional work on re-roofing jobs.

By Andy Swan, Roof Saver

Prior to 2012 the International Residential Code (IRC) and International Building Code (IBC) allowed up to 80 percent of the total net free area (NFA) at the ridge of the roof.  Industry feedback regarding snow and rain infiltration into the attic with this ratio prompted the IRC and IBC to change to code to allow at least 40 percent but not more than 50 percent of the total NFA at the ridge.  In simple terms this increased the intake NFA at the soffit to allow more air to enter the low part of the attic and avoid the unintended weather infiltration.

Roofing contractors are now seeing many re-roofing jobs where the attic ventilation system was designed to the old code requirements. The ratio of Exhaust/ Intake NFA was installed to meet the old 80/20 limits of the code. The attic may lack the proper amount of soffit ventilation to create the required 40/60 or 50/50 ratio of exhaust to intake NFA. In order to comply with current code, contractors have the opportunity to educate the homeowner of the importance of proper attic ventilation, thus securing additional work related to the re-roofing job.

If you start to talk to homeowners about NFA and intake/exhaust ratios, their eyes will likely start to glaze over. Fortunately there are resources available that have already created the materials that explain the importance of proper attic ventilation in easy-to-understand, layman’s terms. Here are links to a few helpful articles:

 Andy Swan is president of Blocksom and Co., manufacturer of Roof Saver Ridge Vent. For more information on Roof Saver visit www.roofsaver.com.

Save



Recommended For You


Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
SOPREMA -   Banner Ad - The Right Coatings for the Right Roofs (RLW on-demand) New Design
English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
ICP - Sidebar Ad - APOC Professional Protection
Wil-Mar - Sidebar - Free Pipe Collar 10/23
RCS - Sidebar - L&L contest
Kool Seal - Sidebar - Sales Rep - May 24
Bitec - StrongHold Sidebar Ad
Project Map It - Side Bar - Digital Portfolio