Polyglass Tech Tips Video Playlist
See all Polyglass videos and subscribe to their YouTube Channel.
Learn more about Polyglass by visiting their Coffee Shop Directory.
Tech Tip: Proper Scupper Flashing Detail
In this step-by-step video, Polyglass technical expert Tim Leithead walks you through how to properly flash a scupper using Polyglass Elastoflex SA V and Polyflex® SA P self-adhered membranes.
Tech Tip: Scupper Reinforcement
In this step-by-step video, Polyglass technical expert Tim Leithead demonstrates how to properly reinforce a scupper utilizing PolyFlash® 1C one-part flashing compound and Polybrite® Reinforcing Polyester.
Tech Tip: Puncture Repair
In this step-by-step video, Polyglass technical expert Henry Rives goes over how to properly patch a hole or damage in Polyflex SA P self-adhered granulated cap sheet using two recommended methods. The first method uses adhesives, either PG 500 or PolyPlus 50. The second method uses heat to activate the self-adhered compound to adhere to the damaged cap sheet.
Tech Tip: Pipe Flashing Detail
In this step-by-step video, Polyglass technical expert Henry Rives the focus of this video is how to properly install a field wrap on a penetration using a Polyflex SA P self-adhered granulated cap sheet. The over granular condition created while installing or repairing this detail needs to be bonded, it is recommended to use PG500 or PolyPlus 50 or a hot air welder.
Tech Tip: Properly Staggering Plies
In this step-by-step video, Polyglass technical expert Tim Leithead walks you through the importance of properly staggering base sheets in a multi ply system. This demonstration focuses on a 3-ply system. All of Polyglass’ premium base sheets have pre-printed lay lines for ease of installation.
