Caulk nozzles have been around for years and when you need a flat bead of sealant, it requires tooling. Laying a round bead and tooling it afterward is just creating more work. It means you’re taking twice as long to seal the lap joint – once to lay the bead and then going over it a second time to tool it.
With labor at a premium and time being precious, why not use a nozzle that was made just for contractors to complete the job in half the time of a round nozzle? The COBRA™ Lap Joint Nozzle was designed to apply a perfect, wide bead of Through The Roof sealant that works expertly for lap joints. The arched profile delivers a bead that is thicker in the middle and thinner on the edges, placing the mass right where you need it – on the lap joint. It also saves in material costs (15 – 50%) as compared to round beads on lap joints.
The concave design of the nozzle makes it dummy proof as well. Eliminate the risk of being called back for a leak because of improperly tooled sealant. The beauty of the COBRA nozzle used with Through the Roof is that it’s nearly impossible to mess up. Simply hold the COBRA at a 45-degree angle and draw it along the lap joint. The self-tooling feature ensures that the product gets put on the joint and not on your hand.
Through The Roof is ideal for the following applications:
Metals - galvanized, aluminum flashing and anodized frames, copper, standing metal seam, bronze, silver, and gold
Plastics – Polycarbonate, ABS, Acrylic sheet, PVC
Roofing – asphalt shingles, clay and glazed tiles, slate, cedar shakes
Building Materials – brick, mortar, downspouts, concrete
With the weather starting to turn colder, caulks and sealants stiffen and become hard to use. That’s not the case with Through The Roof, it stays flexible and won’t become stiff so you can do your job quickly and efficiently – even in cold weather.
Try the COBRA nozzle for free. Request yours today.