English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
Leap - Sidebar - LeapPay - Feb 24
SRS - Sidebar Ad - SRS Para Latinos
Bitec - StrongHold Sidebar Ad
NFBA - Sidebar Ad - Accredited Builder
DaVinci - Sidebar Ad - New Choice For Traditional Beauty
MCA - Summer Meeting 2024 - Sidebar ad
RoofersCoffeeShop - Where The Industry Meets!
English
English
Español
Français

Become Stormseal Certified in August or September and Get 10% Off of Your Starter Kit

AUG - ProdSvc - Stormseal-Become Stormseal Certified in August or September and Get 10% Off of Your Starter Kit
August 1, 2018 at 10:12 a.m.

Trainings are being offered in Orlando, Florida and Amarillo, Texas.

Stormseal is an innovative, patented, Australian product now being manufactured in the United States that is designed to provide emergency storm damage protection for homes and businesses.

This nationally recognized course covers theoretical and practical aspects of installing Stormseal together with a refreshment of the Work Safely at Heights FP1001 course.

During the course, we will assist you in developing safe work method statements and risk assessments for installing Stormseal film while working at height. This course will enable you to comply with current WHS legislation, with successful trainees receiving a nationally recognized Statement of Attainment.

Stormseal installation at heights training is focused on Stormseal film installation together with fall prevention rather than fall arrest. It is designed to equip workers with the knowledge and skills to safely install Stormseal in any height situation, primarily being aimed at insurance works and mainstream construction, including residential & commercial as well as strata & maintenance.

Optimum Academy recognizes that while there is a standard set of learning outcomes for this course, the context, and environment in which the learning is applied is varied. The course will be customized to suit unique workplace requirements. Training covers risk assessment, selection and correct use of Stormseal products, and rigging of anchor systems, fall restraint, work positioning and fall arrest systems.

  • Class cost is $465 *Prerequisite requirement is FP1001-RR fall protection training for residential roofing. This course is offered through ENSA in conjunction with the Stormseal course and costs $425
  • For every non-certified installation crew there must be one certified installer
  • All certifications issued through ENSA North America
  • For product information or inquiries, please email info@stormseal.com.

COURSE OUTLINE

 

  • Regulations and legislation
  • Stormseal product overview
  • Stormseal installation instruction and practical
  • Risk assessment and hazard elimination
  • Equipment selection and use
  • Anchor systems, selecting solid and reliable anchorage, with focus on temporary anchor systems on residential roofs
  • Fall restraint systems, selection of equipment and correct use
  • Work positioning systems, selection of equipment and correct use
  • The use of Stormseal in an "at-height" environment
  • Fall arrest systems
  • Using energy absorbing lanyards
  • Correct use of ladders and ladder safety training

INCLUSIONS

 

  • Training conducted by a Stormseal-approved Height Safety Specialist
  • One 10-hour day of training. Up to 8 trainees per course. A typical course runs from 8:00 am - 5:00 pm
  • Knowledge on relevant legislation and national standards for working at height
  • Recommendations and advice for specialized PPE and equipment for your particular workplace
  • Advice on risk control methods for the type of work at height to be undertaken
  • Plenty of practical, hands-on training to ensure workers can be safe at height
  • Receive a nationally recognized Stormseal accredited installer card
  • Train on Stormseal purpose-built simulators
  • Gain access to Stormseal’s proprietary online ordering system

FP1001-Residential Rooftop Safety Course FP1001-RR is a prerequisite requirement to take FP2001-Stormseal. FP1001-RR is specific to residential roofers operating on both low and steep-slope residential rooftops and addresses the work at height training and educational needs of the employer and employee whose livelihood depends on being safe. This one-day training focuses on the underpinning knowledge of work at height fall protection and risk mitigation focusing on the need to fully understand, identify, and address the potential hazards associated with the task. Delegates will be instructed upon personal fall protection equipment, fall arrest systems, and the importance of fall protection and rescue planning for residential rooftop environments.

All ENSA North America practical training exercises are implemented under a “Skills-Based Evolution Process” which the student experiences as a layering approach, whereby a basic foundation is established, and through reaffirmation and confirmation, additional practical skills are applied to effectively demonstrate and apply through hands-on experiences the complexities of work and rescue at height, achieving success through confidence by all who participate. Reaffirmation through testing is applied with the addition of correction to 100%. This unique philosophy in learning ensures all incorrectly answered test questions are tabled under a whole group discussion to ensure maximum retention and understanding by all students. All training programs are structured upon a pass or fail determination criteria and are in accordance with ANSI Z490.1 – 2016 Criteria for accepted practices in safety, health, and environmental training and under ENSA’s ISO 9001-certified quality management system.

Note: Students must be medically and physically fit with a desire to work at heights. The training environment may require the use of specialized access methods such as those employed within suspension and rope access practices. These practices may be utilized as effective safety tools for the delivery of this program. They are not to be considered trained within this program.

 

2018 Training dates:

Aug 20th - 21st Aug 22nd - 23rd Sept 17th - 18th Sept 19th - 20th Oct 22nd - 23rd Oct 24th - 25th Nov 26th -27th Dec 17th - 18th Dec 19th - 20th

Two-Day Training Course:

One day of rooftop safety training - $425 One day of Stormseal product training - $465 Total cost - $890 Orlando Location Information Location Name:  Florida Roofing and Sheet Metal Association Address: 7071 University Blvd, Winter Park, FL 32792 US Amarillo Location Information Location Name:  Optimum Training Facility Address: 1401 J Ave - Amarillo College East Campus Student Services Building, Amarillo, TX 79111 US Inquire about training here.

For other training dates, click here.



Recommended For You


Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
Adams & Reese - Banner Ad- Being Prepared for OSHA (On-demand RLW)
English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
EVERROOF - Sidebar - Podcast Training - Dec 2023
ASC Building Products - Sidebar - Metal Resources - March
Equipter - Sidebar - $200 Rebate 2
Project Map It - Side Bar - Digital Portfolio
MCA - Summer Meeting 2024 - Sidebar ad
Bitec - StrongHold Sidebar Ad