Presidential Shake install

I have a 12/12 and 16/12 about 88sq - synthetic underlayment - insight on realistic installation pricing at 5 bundles per sq - In cold temp's and these pitches - I would like to be sure of my pricing...

$68 here......Auto shop's get over $100, and the customer brings the work to them! Funny how that works.

The sun is shinning ~ Looking forward to 2014!

I am a licensed contractor :cheer: only been in roofing nearly 18 years... I know what to charge ~ sometimes it is nice to bounce ideas off others ~ that's where I'm at :)

When I've stopped learning ~ I'm dead

Wow! Really? Biding work you have no idea what's involved? That's a bit scary.....Oh, but wait....In a state w/o licensing? Now it makes sense.....

Thank you to all those who responded ~ got the job for $200 per sq ~ again thank you we appreciate you pitching in with pricing that was huge!

I have another situation ~ a little more complicated ~ 84' long barn, 18' to eave, 16/12 (14'up) and 6/12 at roof change (9'up) to ridge. Swags dips and bellies from 1/2" to 6-7" across entirety. Haven't billed yet (owner expecting additional charges) ~ a lot of carpentry and woodwork done to level out for sheeting (7/16) idea's on fair pricing welcomed. Thank you.

:unsure:

88 square, 12 dormers, 26 valleys, 28 returns on 2 story with 12/12 and 16/12 pitch at this time of year, ice, snow, wind, freezing rain.

I would be in at about $35,000. for labour.

I'd be $300-$350 plus a per foot cost of $6.00 to $10.00 per foot for valleys, flashing, etc.

:huh:

28 returns total. 17 valley's front side. 9 valley's back side. 12 dormers. Main body 2 story.

MN.

Photo of home. [ img /]http://www.rooferscoffeeshop.com/rcs/users/sonjalynn73/CAM00172.jpg[/img]

What OS said. If you gotta felt, drip edge, load the roof, & shingle it, I'd be well over $100/sq even if it's two straight sides.

Where are you located?