Translate
Default
English
Español
Français
User Access
Mike NZ-Vaa!
« Back To Roofers Talk
Viewing 2
replies - 1 through 2
(of 2 total)
Author
Posts
September 25, 2014 at 7:42 a.m.
tinner666
:) I might be doing a Sarnafil deck (Dek-Tek). Any pitfalls to watch for when routing the decking? I'll do the routing in the shop before instaliing the wood underlay. :)
( Assuming I have time before the upcoming surgeries.)
October 3, 2014 at 7:22 a.m.
tinner666
:) Thanks for the info Mike. I believe he said Sarnafil was making it now. We discussed so many things, i'm not even sure, but he did talk about them a lot.
October 2, 2014 at 10:05 p.m.
tinner666
Yup!. I was wondering if the lips needed chamfering?
A 2" routing, a 2" lap, and 2 sharp edges at the top.
Just seems as if a very slight bevel would protect the material from a future tear? Rep said 1/8" deep, btw.
Viewing 2
replies - 1 through 2
(of 2 total)
You must be logged in to reply to this topic.
Translate
Default
English
Español
Français
User Access
