English
English
Español
Français

User Access


BITEC-StormBreaker-Sidebar
SRS - Sidebar Ad (En Espanol Page) - Roof Hub
Sherwin-Williams - Sidebar Ad - MetalRoofingElements - Hurricane
Contractor Outlook - Sponsored by SRS
METALCON - Sidebar Ad - METALCON 2025
ServiceFirstSolutions-Grow-Sidebar
FRSA - Side Bar - FRSA Annual Convention & Expo 2025
English
English
Español
Français

Inadequate Welds

« Back To Observations from the Field
Author
Posts
October 23, 2024 at 6:34 p.m.

HannahFord7

Issue: During a routine roof installation project inspection, the Benchmark Field Consultant discovered improper and inadequate hot air welding of single-ply membrane laps; otherwise known as cold welds.

October 23, 2024 at 6:38 p.m.

HannahFord7

According to Benchmark

Solution: All lap seams were tested for integrity by means of destructive field test method. Failed lap seams were covered with a membrane strip, and hot air welded in place, as required.

Impact: Poor hot air seam welds, or cold welds, within the membrane lap seams can result in water intrusion into the roof system, leaks into the building’s interior, and potential damage to roof system components, and ultimately premature roof failure.


« Back To Observations from the Field
You must be logged in to reply to this topic.

SOPREMA -   Banner Ad - The Right Coatings for the Right Roofs (RLW on-demand) New Design
English
English
Español
Français

User Access


BITEC-StormBreaker-Sidebar
WSRCA - Sidebar Ad - Ticket Giveaway
APOC - CCS Sidebar - ProProgram - June
VaproShield-MoisturePhotoSwag-BCD-Sidebar
MCA - Sidebar Ad - MCA Summer Meeting 2025
Uniflex - Sidebar - Silicone Colors - Feb 24
USG - Sidebar - Impact