English
English
Español
Français

User Access


Imperfelx Ads - Bitec 250x265 (1).jpg
Imperfelx Ads - Bitec 250x265 (1).jpg
CCS-OpenForBusiness-Sidebar
FRSA - Side Bar - FRSA Annual Convention & Expo 2025
Maven Group SIdebar Ad
Wil-Mar - Sidebar Ad - Pipe Collar
APOC - CCS Sidebar - ProProgram - June
English
English
Español
Français

Hydro Stop fluid applied system

« Back To Roofers Talk
Author
Posts
July 11, 2014 at 7:11 p.m.

will

Mechanically fastened Densdeck over existing BUR / with a Hydrostop full fabric fluid applied system in Tinners Red finish

August 6, 2014 at 7:33 p.m.

will

We have done several metal roof renovations with this system and they are holding up well, The metal roof on the Alamo in TX. was done with this system also

August 6, 2014 at 7:36 a.m.

Lefty1

They are doing good. I have not done one in probably 6 years. I just went to look at a metal roof on a office building. Since this post, I am going to use Hydrostop if I get the work.

July 17, 2014 at 6:08 p.m.

will

tinner666 Said: I think I prefer flat-locked copper, or better yet, leaded flat-locked copper. :)
Leaded flat locked copper is a thing of beauty,

July 17, 2014 at 6:06 p.m.

will

Thanks Lefty,how are the ones you did holding up?

July 17, 2014 at 5:45 p.m.

tinner666

I think I prefer flat-locked copper, or better yet, leaded flat-locked copper. :)

July 16, 2014 at 6:52 a.m.

Lefty1

Nice work. Went and took their training years ago. Did a few small jobs. Never got anything going with it.

July 13, 2014 at 12:25 a.m.

will

clover83 Said: Spray or roll? If its durability is as good as its looks, Id be impressed. How long you been doing these?
The foundation(basecoat) and polyester fabric are applied with a roof brush that come in 10" 6" and 4" sizes, the topcoats can be roller applied or sprayed, We have been doing them for 4 years now.

July 12, 2014 at 7:47 p.m.

Alba

It looks good. a fully adhered single ply is a better system on a flat roof IMO.

July 12, 2014 at 7:34 p.m.

clvr83

Spray or roll? If it's durability is as good as its looks, I'd be impressed. How long you been doing these?

July 12, 2014 at 6:32 p.m.

will

twill59 Said: Thanks for the pics, Hot. I had never quite conceived what Hydro stop was. I just thought it was coating system, like Conklin
We have not used Conklin but have installed alot of the Hydro-Stop Premium Coat System. It is an approved class 1 roof system FM 4470 approved. (I hope i am not sounding like spam again!). I have spent the last 30 years installing Hot and am a firm believer in the old tar and gravel system, and am always that last to jump on the band wagon when a "new and better system" comes along but so far I have no complaints with this one, thanks for the response guys

July 12, 2014 at 12:07 p.m.

will

roofermann Said: And? Or is this just backhanded spam? :unsure:

No spam here Roofermann just another roofer posting pics of a job my guys recently completed

July 11, 2014 at 7:55 p.m.

roofermann

And? Or is this just backhanded spam? :unsure:


« Back To Roofers Talk
You must be logged in to reply to this topic.

SRS - Banner Ad - 2025 XTV MLS Tour
English
English
Español
Français

User Access


Imperfelx Ads - Bitec 250x265 (1).jpg
Imperfelx Ads - Bitec 250x265 (1).jpg
gFour Marketing - Sidebar Ad - Referrals
Sales Assist - Sidebar Ad - Build Present Close
DaVinci - Sidebar Ad - May 2024 Unmatched, Unlimited, Uncompromising
Progressive Materials - Sidebar - Free Samples! #2
Brava - Sidebar - Jan