Here We GO!
« Back To Roofers Talk
Viewing 2
replies - 1 through 2
(of 2 total)
Author
Posts
January 24, 2014 at 4:53 p.m.
tinner666
:blink: Looked at a FL Copper roof today. Ten years old. Been leaking off and off for a few years. Who spots the issue first?
.jpg)
.jpg)
.jpg)
Those EcoStar are burning holes in the copper too. Not related to the question, btw.
January 24, 2014 at 7:09 p.m.
copperman
Well I see two things right off the top #1 acid rain along the slate line #2 lack of solder/ poor solder work. Not sweated into the joint. You should be seeing a lot more solder then what the pics are showing Hell of a waste of copper
January 24, 2014 at 4:56 p.m.
tinner666
@3 must be the magic one. I think it's the closest shot I bothered to take.
.jpg)
If you open any of them in any editor though, you can zoom in a bit for a closer look.
Oh, the owner said there was a lot of that special stuff thicher that regular tar paper installed first. B)
Viewing 2
replies - 1 through 2
(of 2 total)
You must be logged in to reply to this topic.
