Another solder-less up stand
« Back To Roofers Talk
Author
Posts
October 4, 2014 at 9:34 a.m.
Pattern X
copper, i have experimented with making the seams smaller but need a custom iron to get through the sweep. someday!
October 4, 2014 at 8:32 a.m.
copperman
Thats a European style or look. A bit bulky in my opinion but nice work all the same. When ever you can fold instead of cutting is better any day of the week.
September 29, 2014 at 7:16 p.m.
Pattern X
here is the same type of seam intersecting slate siding. the lap siding just notches the standing part and fully laps the flattened part of the seam. you usually get about 1.5-3" exposure on the wall portion of the pans with this tall seam
September 29, 2014 at 4:55 p.m.
Lefty1
Nice
September 29, 2014 at 4:52 p.m.
Pattern X
It's about 3" of full lap, then the seam comes through the siding. I've got some finished pics intersecting into slate siding I'll show them
You must be logged in to reply to this topic.
